Installation guide

Chapter 3 Opening and Closing the HP NetServer
33
6. At the front of the NetServer, pull the NetServer forward from the rack
until you hear the lockout device engage with a click.
Locking
Latch
Figure 3-6. Locking Latch
CAUTION The HP NetServer covers are heavy. Support them as you
remove them, and allow room to move them away from the
HP NetServer and for storage.
7. Remove Cover 1 by loosening the thumbscrew and sliding the cover
forward to disengage it. Lift it up and away from the chassis.
See Figure 3-7.