Installation guide

Chapter 3 Opening and Closing the HP NetServer

NOTE If the backlight on the LCD display is on, standby power is

also on.

Tools Required

Torx 15 Driver

Torx 25 Driver (rack-mount only)

An anti-static service kit (3M 8501/8502/8503 or equivalent). This kit

includes a static-dissipating work surface, a chassis clip lead, and a wrist

strap.

Removing the LH 3000r Covers

1. Extend the anti-tip foot from under the front of the rack.

WARNING This anti-tip device must be extended to prevent the rack and

NetServer from tipping over, which could damage the

NetServer and injure people.

Anti-Tip

Foot

Leveler

Feet

Figure 3-2. Rack Anti-tip Foot