Installation guide

Chapter 2 Controls, Ports, and Indicators

Adjust Contrast Menu

This is the Adjust Contrast display.

*Adjust Contrast

== {XXXXXXXX}==

1. To decrease contrast, press (Left Arrow).

2. To increase contrast, press

(Right Arrow).

3. To save the contrast setting, press Enter.

Hard Disk Drive LED Indicators

Each disk drive module has two LEDs: one for status and one for activity. You

can view these LEDs on the LH 3000 and the LH 3000r with the bezel open. For

more information on hard drives, see Chapter 4, "Installing Mass Storage

Devices."

Table 2-3. Hard Disk Drive LED Indicators

LED Condition

Red Fast Flashing Drive Fault

Amber Normal Flashing Drive Failure Predicted

Green Solid Drive/Slot Normal

Red Solid 12V Fault

NOTE The Activity LED for a drive flashes green when the drive is

accessed.

Indicators and Controls behind the LH 3000r Front Bezel

Open the LH 3000r bezel to view these indicators:

CD-ROM

DAT

Flexible Disk Drives

Hard Disk Drives