Installation guide

Chapter 2 Controls, Ports, and Indicators
14
Viewing System Information
Use the HP NetServer’s status screen and buttons to view system configuration
information, a log of current and past conditions, replaceable parts information,
adjust screen contrast, and more.
NOTE The small door over the Power and Reset buttons prevents
someone from accidentally powering down or resetting the
NetServer. Open it to use the Power and Reset buttons.
Table 2-2. Front Panel Console Buttons
Button Name Description
Escape
Return to a previous menu.
Enter
Select an item from a menu.
Down Arrow
Scroll down one line through the current screen or
menu.
Up Arrow
Scroll up one line through the current screen or menu.
Left Arrow
Adjust contrast (when adjust contrast menu selected).
Right Arrow
Adjust contrast (when adjust contrast menu selected).
NOTE The buttons and menus operate when the HP NetServer has
powered down or hung, as long as the NetServer is plugged in.
During POST (power-on self-test) the buttons and menus are
disabled temporarily so that the status screen can display POST
and boot messages.
Main Menu
This is the status screen default display for the LH 3000:
HP NetServer
LH 3000
1. To reach the main menu from this default screen, press the Enter button.