HP Mini 210 - Maintenance and Service Guide (Consumer Models Only)

Reverse this procedure to install the power connector cable and DC bracket.
RJ-45 cover
Description Spare part number
RJ-45 cover 626580-001
Before removing the RJ45 cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
Battery on page 33).
b. Service access cover (see
Service access cover on page 36).
c. Hard drive (see
Hard drive on page 39).
d. Keyboard (see
Keyboard on page 48).
e. Top cover (see
Top cover on page 51).
f. Display assembly (see
Display assembly on page 57).
g. System board (see
System board on page 63).
Component replacement procedures 67