Getting Started HP Mini 210 Netbook PC
© Copyright 2010 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Welcome .......................................................................................................................................................... 1 Finding information ............................................................................................................................... 2 2 Getting to know your computer ..................................................................................................................... 4 Top ....................
5 Keyboard and pointing devices ................................................................................................................... 28 Using the keyboard ............................................................................................................................ 29 Identifying the hotkey ......................................................................................................... 29 Identifying the action keys ......................................................
8 Customer support ......................................................................................................................................... 52 Contacting customer support ............................................................................................................. 53 Labels ................................................................................................................................................. 54 9 Specifications ......................................
viii
1 Welcome ● Finding information After you set up and register the computer, it is important to take the following steps: ● Set up HP QuickWeb—Immediately access your music, digital photos, and the Web without launching your main operating system. For more information, refer to HP QuickWeb on page 14. ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, refer to Networking on page 23.
Finding information The computer comes with several resources to help you perform various tasks. Resources For information about Quick Setup poster ● How to set up the computer ● Help to identify computer components HP Notebook Reference Guide ● Power management features To access this guide, select Start > Help and Support > User Guides.
Resources For information about Limited Warranty* Warranty information To access the warranty: Select Start > Help and Support > HP Warranty. – or – Go to http://www.hp.com/go/orderdocuments. *You can find the expressly provided HP Limited Warranty applicable to your product in the Start menu on your PC and/or in the CD/DVD provided in the box. For some countries/regions a printed HP Limited Warranty is provided in the box.
2 4 Getting to know your computer ● Top ● Front ● Right side ● Left side ● Display ● Bottom Chapter 2 Getting to know your computer
Top TouchPad Component Description (1) TouchPad light Turns the TouchPad on and off. Quickly double-tap the TouchPad light to turn the TouchPad on and off. (2) Left TouchPad button Functions like the left button on an external mouse. (3) Right TouchPad button Functions like the right button on an external mouse. (4) TouchPad zone Moves the pointer and selects or activates items on the screen.
Lights Component (1) (2) (3) (4) 6 Description TouchPad light Caps lock light Mute light Wireless light Chapter 2 Getting to know your computer ● Amber: The TouchPad is off. ● Off: The TouchPad is on. ● On: Caps lock is on. ● Off: Caps lock is off. ● Amber: Computer sound is off. ● Off: Computer sound is on. ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off.
Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key Displays system information when pressed in combination with the esc key. (3) Windows® logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortcut menu for items beneath the pointer. (5) Action keys Execute frequently used system functions.
Front Component Speakers (2) 8 Chapter 2 Getting to know your computer Description Produce sound
Right side Component (1) (2) (3) Description Digital Media Slot Power light Power switch Supports the following digital card formats: ● Memory Stick ● Memory Stick Pro ● MultiMediaCard ● Secure Digital (SD) Card ● Secure Digital High Capacity (SDHC) Memory Card ● Secure Digital Extended Capacity (SDxC) Memory Card ● White: The computer is on. ● Blinking white: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation.
Component (5) Description Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (6) 10 RJ-45 (network) jack Chapter 2 Getting to know your computer Connects a network cable.
Left side Component Description (1) Power connector Connects an AC adapter. (2) Battery light ● Off: The computer is running on battery power. ● Blinking white: The battery has reached a low or critical battery level. ● Amber: A battery is charging. ● White: The computer is connected to external power and the battery is fully charged. (3) External monitor port Connects an external VGA monitor or projector. (4) Vent Enables airflow to cool internal components.
Display Component Description (1) WLAN antennas (2)* Send and receive wireless signals to communicate with wireless local area networks (WLAN). (2) WWAN antennas (2)* (select models only) Send and receive wireless signals to communicate with wireless wide-area networks (WWAN). (3) Internal microphone Records sound. (4) Webcam Records video and captures still photographs. To use the webcam, select Start > All Programs > HP Media Suite, and then click Camera.
Bottom Component Description (1) Battery locking latch Locks the battery into the battery bay. (2) Battery bay Holds the battery. (3) Battery release latch Releases the battery from the battery bay.
3 HP QuickWeb ● Enabling HP QuickWeb ● Starting HP QuickWeb ● Identifying the QuickWeb LaunchBar ● Configuring the network ● Starting Microsoft Windows ● Turning HP QuickWeb on and off After completing the Windows setup the first time you turn on the computer, the QuickWeb setup screen appears. HP QuickWeb is an optional, instant-on environment that is separate from the main operating system.
Enabling HP QuickWeb Follow the on-screen instructions to enable QuickWeb. After you have enabled QuickWeb, the QuickWeb Home screen appears whenever you turn on the computer. NOTE: To turn on or turn off HP QuickWeb, refer to the section Turning HP QuickWeb on and off on page 22.
Starting HP QuickWeb 1. Turn on the computer. The HP QuickWeb Home screen appears. 2. Click an icon on the QuickWeb Home screen to launch an application. NOTE: When the HP QuickWeb Home screen first appears, it displays an automatic timer above the Start Windows icon. If you do not move your mouse, or press a key within 15 seconds, the computer starts Microsoft Windows. For more information on the QuickWeb timer and changing the timer settings, refer to the HP QuickWeb software Help.
Identifying the QuickWeb LaunchBar The QuickWeb LaunchBar contains the QuickWeb control icons (1), LaunchBar icons (2), and the notification icons (3). Identifying the QuickWeb control icons Icon Function Launches the Windows operating system. Shuts the computer down. Returns to the QuickWeb Home screen. Identifying the QuickWeb LaunchBar icons Icon Function Launches the Web browser. You can browse and search the Web, open bookmarks, and create links to your favorite Web sites.
Icon Function Launches Music Player. Select and play music stored on your hard drive, external drives, or external media. Supports .mp3, .aac (MPEG-4), and audio CD formats. Launches Photo Viewer. Browse photos stored on your hard drive or external drive. Supports .jpg, .png, .gif, .tiff, and .raw formats (select .raw formats only). Identifying the QuickWeb notification icons Icon Function When a USB drive is inserted, the File Manager window containing a USB icon appears.
Icon Function Launches the Power Control dialog box to see information about battery capacity: ● When the computer is connected to AC power, the icon appears with an AC power cord. ● When the computer is running on battery power, the icon appears as only a battery. The state of charge is indicated by the color of the battery icon: ● Green: charged ● Yellow: low ● Red: critically low Launches the QuickWeb software Help.
Configuring the network You can set up a wireless connection in QuickWeb using the HP QuickWeb Configuration Tool. NOTE: Bluetooth technology is not supported in HP QuickWeb. To access this tool: 1. Click the Settings icon in the system tray. 2. Select Network, and then select the Enable Wi-Fi check box. For more information on setting up a wireless connection using QuickWeb, refer to the software Help.
Starting Microsoft Windows NOTE: If QuickWeb has been activated, it will start every time you turn on your computer. To start Microsoft® Windows, you must either wait until the automatic timer counts to zero after 15 seconds, or click the Start Windows icon in the QuickWeb Home screen. For more information on the QuickWeb timer and changing the timer settings, refer to the HP QuickWeb software Help. 1. Turn on the computer. The HP QuickWeb Home screen appears. 2.
Turning HP QuickWeb on and off 1. Select Start > All Programs > HP QuickWeb > HP QuickWeb Configuration Tool. The QuickWeb dialog box is displayed. 22 2. Select the Status tab. 3. Select the Enable or Disable check box to turn on or turn off QuickWeb. 4. Click OK.
4 Networking ● Using an Internet service provider (ISP) ● Connecting to a wireless network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ● Wireless—For mobile Internet access, you can use a wireless connection. Refer to Connecting to an existing WLAN on page 25 or Setting up a new WLAN network on page 26.
Using an Internet service provider (ISP) Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless computer to the modem, and test the Internet service. NOTE: Your ISP will give you a user ID and password to access the Internet. Record this information and store it in a safe place.
Connecting to an existing WLAN 1. Turn on the computer. 2. Be sure that the WLAN device is on. 3. Click the network icon in the notification area, at the far right of the taskbar. 4. Select a network to connect to. 5. Click Connect. 6. If required, enter the security key.
Setting up a new WLAN network Required equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ● A wireless router (purchased separately) (2) ● Your new wireless computer (3) NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type of modem you have. The illustration shows an example of a completed WLAN network installation that is connected to the Internet.
Configuring a wireless router For help in setting up a WLAN, refer to the information provided by your router manufacturer or your ISP. The Windows operating system also provides tools to help you set up a new wireless network. To use the Windows tools to set up your network, select Start > Control Panel > Network and Internet > Network and Sharing Center > Set up a new connection or network > Set up a new network. Then follow the on-screen instructions.
5 28 Keyboard and pointing devices ● Using the keyboard ● Using pointing devices Chapter 5 Keyboard and pointing devices
Using the keyboard Identifying the hotkey A hotkey is a combination of the fn key (1) and the esc key (2). Hotkey Description fn+esc Displays information about system hardware components and the system BIOS version number.
Identifying the action keys Action keys, located at the top of the keyboard, execute specifically assigned functions. Press a key to activate its assigned function. Action key Description f1 Opens Help and Support. Help and Support provides tutorials, answers to questions, and product updates. f2 Decreases the screen brightness level. f3 Increases the screen brightness level. f4 Switches the screen image among display devices connected to the system.
Using keypads The computer supports an optional external numeric keypad or an optional external keyboard that includes a numeric keypad.
Using pointing devices NOTE: In addition to the pointing devices included with your computer, you can use an external USB mouse (purchased separately) by connecting it to one of the USB ports on the computer. Setting pointing device preferences Use Mouse Properties in Windows® to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Devices and Printers.
Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go. Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse. Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time. To turn the gestures on and off: 1.
3. Select the gesture that you want to turn on or off. 4. Click Apply, and then click OK. NOTE: The computer also supports additional TouchPad features. To view and turn on these features, click the Synaptics icon in the notification area, at the far right of the taskbar. Click Pointer Device Properties, and then click the Device Settings tab. Select the device, and then click Settings.
Scrolling Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers slightly apart on the TouchPad, and then drag them across the TouchPad in an up, down, left, or right motion. NOTE: Scrolling speed is controlled by finger speed. Pinching/Zooming Pinching allows you to zoom in or out on images or text. ● Zoom in by placing two fingers together on the TouchPad, and then moving them apart.
Rotating Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone. Move the right forefinger around the anchored finger in a sweeping motion, moving from 12 o’clock to 3 o’clock. To reverse the rotation, move your right forefinger from 3 o’clock to 12 o’clock. 36 NOTE: Rotating must be done within the TouchPad zone. NOTE: The factory setting for gesture rotation is Off.
6 Maintenance ● Replacing the battery ● Removing or replacing the vanity cover ● Replacing the hard drive ● Replacing the memory module ● Updating programs and drivers ● Routine care 37
Replacing the battery Inserting the battery To insert the battery: 38 1. Save your work and shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Unplug the power cord from the AC outlet. 4. With the display closed, position the computer upside down on a flat surface with the battery bay toward you. 5. Insert the battery (1) into the battery bay until the battery release latch (2) clicks. 6.
Removing the battery To remove the battery: CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery. 1. Save your work and shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Unplug the power cord from the AC outlet. 4.
Removing or replacing the vanity cover CAUTION: To prevent information loss or an unresponsive system: Save your work and shut down the computer before adding or replacing a memory module, hard drive, or SIM. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.
3. Insert the battery (3) (see Inserting the battery on page 38).
Replacing the hard drive Removing the hard drive 1. Save your work and shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Unplug the power cord from the AC outlet. 4. Remove the battery (see Removing the battery on page 39). 5. Remove the vanity cover (see Removing the vanity cover on page 40). 6. Grasp the tab on the hard drive cable connector (1) and lift it up to disconnect the hard drive cable from the system board. 7.
4. Grasp the tab on the hard drive cable connector (3), and then carefully press the hard drive cable connector onto the system board until it snaps into place. 5. Replace the vanity cover (see Replacing the vanity cover on page 40). 6. Replace the battery (see Inserting the battery on page 38). 7. Reconnect external power and external devices. 8. Turn on the computer.
Replacing the memory module The computer has one memory module slot. The capacity of the computer can be upgraded by replacing the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c.
Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis with the latest versions. Go to http://www.hp.com/support to download the latest versions. You can also register to receive automatic update notifications when they become available. Routine care Cleaning the display CAUTION: To prevent permanent damage to the computer, never spray water, cleaning fluids, or chemicals on the display.
7 Backup and recovery ● Recovery discs ● Performing a system recovery ● Backing up your information Recovery after a system failure is as good as your most recent backup. HP recommends that you create recovery discs immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup.
Recovery discs HP recommends that you create recovery discs to be sure that you can restore your computer to its original factory state if the hard drive fails, or if for any reason you cannot recover using the recovery partition tools. Create these discs after setting up the computer for the first time. Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of recovery discs.
Note the following when performing a system recovery: ● You can recover only files that you have previously backed up. HP recommends that you use HP Recovery Manager to create a set of recovery discs (entire drive backup) as soon as you set up the computer. ● Windows has its own built-in repair features, such as System Restore. If you have not already tried these features, try them before using Recovery Manager. ● Recovery Manager recovers only software that was preinstalled at the factory.
Backing up your information You should back up your computer files on a regular schedule to maintain a current backup. You can back up your information to an optional external hard drive, a network drive, or discs. Back up your system at the following times: ● At regularly scheduled times NOTE: Set reminders to back up your information periodically.
Using system restore points A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes. NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point. You also can create additional restore points to provide increased protection for your files and settings.
8 52 Customer support ● Contacting customer support ● Labels Chapter 8 Customer support
Contacting customer support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/go/contactHP NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Here you can: ● Chat online with an HP technician.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component (1) Product name (2) Serial number (s/n) (3) Part number/Product number (p/n) (4) Warranty period (5) Model description Have this information available when you contact technical support. The serial number label is affixed to the bottom of the computer.
9 Specifications ● Input power ● Operating environment 55
Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
Operating environment Factor Metric U.S.
Index A action keys adjusting volume 30 audio CD or DVD controls 30 decrease screen brightness 30 Help and Support 30 identifying 7 increase screen brightness 30 muting speaker sound 30 switching screen image 30 using 30 wireless 30 audio-in (microphone) jack, identifying 11 audio-out (headphone) jack, identifying 11 B backing up customized window, toolbar, and menu bar settings 50 personal files 50 battery bay 13, 54 battery light, identifying 11 battery locking latch 13 battery release latch 13 battery,
M media controls, keys 30 memory module inserting 44 removing 44 replacing 44 microphone (audio-in) jack, identifying 11 Microsoft Certificate of Authenticity label 54 monitor port, identifying 11 mouse, external setting preferences 32 mute key, identifying 30 mute light, identifying 6 N network jack, identifying turn off 22 turn on 22 QuickWeb software TouchPad zone, identifying 5 traveling with the computer 54 14 R recovering a program or driver 47 recovery discs 47, 48 Recovery Manager 47, 48 recovery
