- Hewlett-Packard User Guide Printer LCS60

LCS60 Software
Configure Protocols and Gateway Services — srvsetup
Note: The following prompts (ipas) will be displayed only if SLIP or PPP is
configured.
*** This step allows the LCS60 Administrator to configure the IP address
*** server, which is used by < ppp slip > for both the static and dynamic
*** allocation of IP Addresses. Since one or more of these services is
*** currently configured, IPAS must be configured.
CAUTION: Please refer to the I&A Guide for instructions
about configuring this feature.
IP ADDRESS CONFIGURATION MANAGEMENT FOR SLIP AND PPP SERVICES
1 Configure/Display IP Network Security Groups
2 Configure/Display Reserved IP Addresses
Enter Menu Selection
[ ? for help, q to quit, RETURN for menu ]
==> 1
IP NETWORK SECURITY GROUP MANAGEMENT FOR SLIP AND PPP SERVICES
1 Add an IP Network Security Group
2 Delete an IP Network Security Group
3 Edit an IP Network Security Group
4 Display all IP Network Security Groups
Enter Menu Selection
[ ? for help, q to quit, RETURN for menu ]
==> 1
NOTICE: The first IP Network Security Group is required to be named [morse]
Enter an IP Network Security Group name [q to quit, ? for help]
==> morse
Enter an Internet network address
[q to quit]
==> 154.12.23
==> Is [154.12.23.0] divided into subnets ? [y, n, ?] y
Enter number of mask bits for this subnet
[? for help, q for quit]
==> 8
*** New IP Network Security Group "morse" Configuration is:
***
*** Class B IP Address: 154.12.23
*** Network Mask: 255.255.255.0
Is this correct?
Enter y,n ==> y
Issue 3 3-15