- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Table of Contents
LCS60 Application Software Installation 9-9
Removing the LCS60 Application Software 9-13
Upgrade 9-15
Remote Upgrade 9-16
Installing an Upgrade on a Remote Upgrade Client 9-16
Processor Board Firmware Update 9-19
Processor Diagnostics - MVME197 9-23
VMEDKHS Diagnostics 9-25
Connection Verification 9-28
LCS60 to Data Switch Connected Host Verification
(dkcu) 9-28
LCS60 to Data Switch Verification – Loopback Test
(dkcu) 9-29
LCS60 to Local Ethernet Host Verification (ping) 9-29
Memory Dump 9-30
After the Dump is Completed 9-32
A
Originating Group Security
srvtab A-1
Server Table A-1
System Field A-2
Service Field A-3
Flags Field A-4
User Field A-5
Program Field A-6
Initial Parms Field A-7
Server Table Scanning Rules A-8
Modifications to the Server Table A-9
Server Table Validation and Matching A-9
B
StarKeeper II NMS
Configuration of the StarKeeper II NMS B-1
Diskette or Tape Installation B-1
StarKeeper II NMS – Configuration Commands B-4
Alarms to StarKeeper II NMS B-6
Issue 2 vii