- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Table of Contents
7
Gateway Services – Configuration and
Administration
LCS60 Configuration and Connection for Gateway
Service 7-1
Access to Gateway Services – Dialstrings 7-8
Telnet Service 7-8
Inactivity Timeout Option 7-9
Return to DESTINATION Option 7-10
User Information 7-10
Async-to-TCP Gateway Service 7-11
TCP-to-Async Gateway Service 7-12
UUCP Feature 7-13
Data Switch to LCS60 to LAN 7-13
LAN to LCS60 to Data Switch 7-15
Example UUCP Service Using SunOS 4.0 7-16
Example UUCP Service Using NCR 4.0 7-17
Administration 7-18
Service Ports 7-18
Trace TCP/Async 7-19
Error Messages 7-19
Log Files 7-20
8
Administration
Basics 8-1
Logging On 8-1
System Console 8-2
Remote Administration 8-2
lcsadm Interface 8-3
Common Commands 8-4
Initial System Setup (initsetup) 8-5
Top Directory Commands 8-5
Session Directory Commands 8-7
Ports Directory Commands 8-10
Service Directory Commands 8-12
Manager Directory Commands 8-13
Config Directory Commands 8-16
Issue 2 v