- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Glossary
Glossary
Nohup Indicates whether the no hangup feature has been enabled.
2way Indicates whether the 2way feature has been enabled.
SID-Type The security server type (e.g., NAC).
Idle The inactivity timeout in minutes.
Wait Indicates whether the wait-for-input timeout feature is disabled
or the number of minutes configured if it has been enabled.
Pre-Defined
Address
The PDD call address associated with the specified port.
Summary
Top>Ports> summary
Limit The maximum number of ports that can be configured (for service
ports).
Cfg. The number of ports configured.
Cap. The number of ports configured (Cfg) divided by the Limit.
Use The number of ports in use (enabled).
Directory The port number of the port configured for directory service.
Service Directory
Show
Top>Service> show
Serv.
Name
The type of service (tcpasy, asytcp, slip, ppp, arap).
Issue 3 G-17