- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Glossary
Glossary
Ports Directory
Show Statistics
Top>Ports> show
Port # The number of the configured port.
Service The service configured on the specified port (i.e., directory, telnet,
socket).
State The state of the port service (up or down).
Total The number of times the port has been accessed.
Busy The number of times the port has been busy when access has been
attempted.
Fail The number of times port access has been tried and failed.
Reset The number of times the port has been reset.
Show Configurations
Top>Ports> show -c
Port # The number of the configured port.
Service The service configured on the specified port.
Tcpws The window size configured for the port.
8-bit Indicates whether the service port is configured with this option
enabled (on) or disabled (-).
G-16 Issue 3