- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Glossary
Glossary
Trace PPP
Top>Session> trace ppp
Sesid Session ID number.
Name The name of the PPP session. This name will be the letter p
followed by the data switch channel number.
Remote User The symbolic name (or numeric equivalent if the -n option is
used) of the remote user’s IP address.
Chan The data switch channel number used for the gateway.
Switch Address The originating group information.
Trace SLIP
Top>Session> trace slip
Sesid Session ID number.
Name The name of the SLIP session. This name will be the letter s
followed by the data switch channel number.
Local Address The LCS60 IP address, displayed using the -v option.
Dest Address The IP address of the user.
Remote User The user ID of the remote user.
Chan The data switch channel number used for the gateway.
Switch Address The originating group information.
Issue 3 G-15