- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Glossary
Glossary
Remote User The user ID (or numeric equivalent if the -n option is used)
of the remote user’s IP address.
Chan The data switch channel number used for the gateway.
Switch Address The originating group information.
Trace Async/TCP
Top>Session> trace asy
Top>Session> trace tcp
Sesid Session ID number.
State The state of the TCP-to-Async or Async-to-TCP connection
(IDLE, CONN, or FLOW).
Local Address The LCS60 address. This is displayed when using the -v
option in the form address.port# (e.g., morse-e0.23).
Port The port number of the gateway. The port number is shown
as part of the Local Address field when using the -v option.
Foreign Address The symbolic name (or numeric equivalent if the -n option is
used) of the remote host’s IP address.
Chan The data switch channel number used for the gateway.
Switch Address The originating group information.
Remote User The NAC user ID if a NAC is used.
G-14 Issue 3