- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Appendix D
UNIX System Software Installation
Add the following line to the file:
"SEAGATE" "ST5660N" mfuj2624 7 "SEAGATE ST5660N"
Note: Separate the fields above using tabs only; spaces are not allowed.
Write and quit the file.
10 . For the Seagate ST5660N drive only: Enter Ctrl-D at the # to return to the
installation menu and continue as shown below:
# Ctrl-D
Leaving maintenance shell:
UNIX SYSTEM V/88 Release 4 Upgrade/Installation
You have the following options:
1) Full installation
2) Upgrade an existing R40V2 or later system
3) Exit without doing anything (reboot)
4) Enter maintenance mode
Enter option number of choice: [ 1-4 ] Ctrl-C
Installation/Upgrade Interrupt
You have interrupted the installation or upgrade
No modifications to the system have yet taken place.
1) Restart the installation.
2) Reboot the machine.
3) Shutdown the machine.
Enter option number of choice: [ 1-3 ] ( 1 ) 1
Analyzing configuration...
11 . For the Seagate ST5660N drive only: Enter Return once the "How to
Type Responses" screen is displayed again.
12 . For both the Fujitsu and Seagate ST5660N drives: Continue with the dialo-
gue that follows:
D-4 Issue 3