- Hewlett-Packard User Guide Printer LCS60

Appendix D
UNIX System Software Installation
5 . Determine which type of drive you have by typing ioi at the 197-Bug>
prompt. The response to the ioi command is shown below for each of the
three types of drives:
Seagate ST5660N
0 0 VME197 0 $00 N SEAGATE ST5660N 0600
Seagate ST11200N
0 0 VME197 0 $00 N SEAGATE ST11200N ST31230 0456
Fujitsu
0 0 VME197 0 $00 N FUJITSU M2624F-512 M405
If you have a Seagate ST11200N drive, refer to Chapter 9 for UNIX Sys-
tem Software Installation; if you a have a Fujitsu drive or a Seagate
ST5660N, continue with the instructions below.
6 . Enter bo 0 40 COREunix at the 197-Bug> prompt. This will generate ins-
tallation screens ending with the Screen D-1. This information will not be
repeated; use Screen D-1 as you proceed with installation for instructions
on entering responses.
Screen D-1: How to Enter System Responses
How to Type Responses during Installation
When typing responses:
<response><RETURN> Enters <response>
<CTRL>-h Erases the last character typed
<CTRL>-u Erases the entire line
<CTRL>-r Reprints the entire line
<CTRL>-s Pauses output to the screen
<CTRL>-q Resumes output to the screen
<CTRL>-z Suspends the installation
<CTRL>-c Cancels the installation and returns here
?<RETURN> Gets help for the current screen
Press <RETURN> to continue.
D-2 Issue 3