- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF

Appendix A
srvtab
Initial Parms Field
The initial parms field (fixed program arguments field) of a server table entry speci-
fies the initial (fixed) arguments for the invoked program. The colon-separated
arguments from the server table will be passed to the invoked program starting
as the zero argument. If the flag is present in the server table entry, additional
arguments obtained from the incoming remote execution channel will follow the
initial arguments when the program is invoked.
Initial arguments may consist of, or be embedded with, one or more tokens
(sometimes referred to as special codes) that may be used to substitute information
from the dialstring. Each token is a two-character string consisting of a percent
sign (%), followed by a single alphabetic character. Invalid tokens are silently
removed and are not expanded.
Table A-3 summarizes the values and descriptions of the allowed substitution
tokens. Since some older versions of the Datakit II VCS common controller do not
support certain features, the substitution string may turn out to be null.
Table A-3: Program Arguments Specification
_ ________________________________________________________________________
Specification Description
_ ________________________________________________________________________
%b The baud rate of the calling terminal. This token is not expanded if the incoming
call did not originate from a port providing baud rate information. (For example,
hosts currently do not provide this.)
_ ________________________________________________________________________
%c Originating channel number of the call being serviced.
_ ________________________________________________________________________
%d The dialed server name (for example, host). This does not include the period or
anything after it.
_ ________________________________________________________________________
%e The service field of the dialstring (for example, pupu).
_ ________________________________________________________________________
%f The originating-group name of the caller (for example, lc/sporty/hotrod).
_ ________________________________________________________________________
_ ________________________________________________________________________
Issue 3 A-7










