- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Maintenance
Reload System Software
UFS Utility Fixes Tape Installation
Install the UFS Utility Fixes tape (tape 2 of 3) by inserting the UFS Utility tape in
the tape drive and conducting the dialogue shown in Screen 9-2.
Note: In the pkgadd -d /dev/rmt/ctape1 command, the last character is a one
not the letter L.
Screen 9-2: UFS Utility Fixes Maintenance Tape Installation
# pkgadd -d /dev/rmt/ctape1
Installation in progress.
The following packages are available:
1 FH4042XX1 Post-IR ufs utility fixes
(m88k) IR03
Select package(s) you wish to process (or ’all’ to process
all packages). (default: all) [?,??,q]: Return
Processing package instance <FH4042XX1> from </dev/rmt/ctape1>
Post-IR ufs utility fixes
Version IR03 (m88k)
## Processing package information.
## Processing system information.
7 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
Installing Post-IR ufs utility fixes as <FH4042XX1>
[ verifying class <none> ]
## Installing part 1 of 1.
Files overwritten by this package class have been saved in
/var/sadm/pkg/FH4042XX1/save/root
[ verifying class <replace> ]
Installation of <FH4042XX1> was successful.
Remove the tape once you have completed the installation.
Issue 3 9-7