- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Maintenance
Reload System Software
6 . Enter bo 0 40 COREunix at the 197-Bug> prompt. This will generate ins-
tallation screens ending with the Screen 9-1. This information will not be
repeated; use Screen 9-1 as you proceed with installation for instructions
on entering responses.
Screen 9-1: How to Enter System Responses
How to Type Responses during Installation
When typing responses:
<response><RETURN> Enters <response>
<CTRL>-h Erases the last character typed
<CTRL>-u Erases the entire line
<CTRL>-r Reprints the entire line
<CTRL>-s Pauses output to the screen
<CTRL>-q Resumes output to the screen
<CTRL>-z Suspends the installation
<CTRL>-c Cancels the installation and returns here
?<RETURN> Gets help for the current screen
Press <RETURN> to continue.
Note: If you have not inserted the tape the following will be displayed.
Booting from: VM197, Controller 0, Drive 40
Loading: COREunix
Boot logic error
Packet status: 0000
Additional Error Status: 0002
7 . Enter Return when Screen 9-1 is displayed; this will lead to the installa-
tion screen shown below. Continue with the dialogue as shown:
9-2 Issue 3