- Hewlett-Packard User Guide Printer LCS60

Administration
lcsadm Interface
Screen 8-5: Manager Directory
Top> manager
NOTICE: ’manager’ requires super-user permission
Password: xxxx
Top> Manager ># Return
Commands may be abbreviated. Commands are:
config/ help log ports/ quit
server/ service/ session/ show start
stop top/ update ^ !
Note: The Manager directory requires the root password. If you have
previously supplied the root password, the system will not ask for it.
The following commands are available from the Manager directory:
Name log
Synopsis log [level]
Description The log command is used to obtain and change the
verbosity of the log level of the LCS60 manager (lcm.log).
The higher the number given for the log level, the more
detailed the log file; valid values are 3, 6 (default), and 20.
Name start or stop
Synopsis start or stop
Description The start and stop commands can be used to start and stop
the LAN Communications manager (LCM). start starts the
LCS60 software. stop terminates all active services and
their corresponding sessions.
Note: Because stop terminates all active sessions, this command can only be
executed from the system console.
8-14 Issue 3