- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Administration
lcsadm Interface
Name flush
Synopsis flush service-type [service-type ...]
Description The flush command resets statistics for a service type.
This command requires root permission.
Name show
Synopsis show [service-type ...]
Description The show command lists statistics on configured services,
capacities, and current states. Entering show without
arguments will display statistics for all services.
Name summary
Synopsis summary
Description This command summarizes the service information
including the number of sessions configured for each
service and the state of the service. For PPP, this command
lists the number of IP, AppleTalk, and IPX over PPP
sessions.
Name types
Synopsis types
Description The types command lists the available service types.
Manager Directory Commands
The Manager directory (Screen 8-5) provides utilities to obtain information about
the LCS60 management (LCM) subsystem components. This directory is not
used for standard administration but should only be used for diagnostic admin-
istrative purposes.
Issue 3 8-13