- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Administration
lcsadm Interface
Name update
Synopsis update
Description This command updates the TCP service port configuration
table. This command requires root permission.
Service Directory Commands
The Service directory (Screen 8-4) provides a method for obtaining current status
of configured services as well as enable/disable commands.
Screen 8-4: Service Directory
Top> service
Top>
Service
> Return
Commands may be abbreviated. Commands are:
config/ disable enable flush help
manager/ ports/ quit session/ show
summary types top/ ^ !
The following commands are available from the Service directory:
Name disable or enable
Synopsis disable or enable service-type [service-type ...]
Description The disable (enable) command allows the administrator to
turn a particular service off (on). These commands require
root permission.
Note: When you disable a service the current sessions will not be taken down.
8-12 Issue 3