- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
Administration
lcsadm Interface
Name types
Synopsis types
Description This command lists the available LCS60 service types as
shown below.
Top>Session># types
Help for different types of services. Service types may be abbreviated.
They are:
Types Description
===== ===========
tcpasy TCP/Async Service
asytcp Async/TCP Service
slip Serial Line IP Service
ppp Point-to-Point Service
arap AppleTalk Remote Access Service
Top>Session>#
Ports Directory Commands
Screen 8-3: Ports Directory
Top>Config># ports
Top>
Ports
># Return
Commands may be abbreviated. Commands are:
config/ disable enable flush help
manager/ quit service/ session/ show
summary top/ update ^ !
The Ports directory (Screen 8-3) contains utilities for the TCP-to-async service.
The following commands are available from the Ports directory:
8-10 Issue 3