- Hewlett-Packard User Guide Printer LCS60

Administration
Logging On
# dkcu mlkway/earth/morse.lcsadm
Circuit Open
LCS60 Administrative Command Interface. Enter ’RETURN’ key for command list!
morse:Top>
Note: Remote access is impossible before the system is configured and the
dkhost protocol has been started.
lcsadm Interface
The lcsadm interface uses a hierarchical system of directories and commands as
shown in Figure 8-1. The available directories – Top, Config, Session, Service,
Ports, Manager, and Manager Server – and commands are described in the follow-
ing sections.
You can obtain access to the lcsadm interface commands with one of the follow-
ing:
# lcsadm
Top>
----------------------------------------------------
# lcsadm
directory command
Top> directory >
----------------------------------------------------
# lcsadm -c
directory command
#
The first method above takes you to the lcsadm interface’s Top directory; the
second executes the command specified and takes you to the specified lcsadm
interface directory; the third method executes the command specified and
returns you to the system prompt.
Issue 3 8-3