- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF
SLIP
Administration
Top># stop slip
*** Stopping "slip" ...
Top>#
Call Trace Example
The following screen shows how to obtain call trace information for SLIP.
Top>Session> # trace slip
LCS60 Serial Line IP Gateway Tracking Information: Jun 16 10:57:50
Sesid Name Dest. Address Remote User Chan Switch Address
===== ==== ============= ============ ==== ====================
1.78 s510 154.12.23.7 cbaker 510 yard/samterm.141.10
1.106 s508 154.12.23.18 smccoy 508 yard/samterm.140.6
Errors
For SLIP connection errors, refer to Appendix C.
Log File
The log file, slip.log is written to by the LCS60 interface software and contains
information about incoming SLIP call requests. To display the contents of the log
file, use the page command as shown in the example below:
5-14 Issue 3