- Hewlett-Packard User Guide Printer LCS60

SLIP
LCS60 Configuration and Connection for SLIP Service
Screen 5-1: Continued
==> Library
Enter an Internet network address
[q to quit]
==> 154.12.24
==> Is [154.12.24.0] divided into subnets ? [y, n, ?] y
Enter number of mask bits for this subnet
[? for help, q for quit]
==> 8
*** New IP Network Security Group "Library" Configuration is:
***
*** Class B IP Address: 154.12.24
*** Network Mask: 255.255.255.0
Is this correct?
Enter y,n ==> y
IP NETWORK SECURITY GROUP MANAGEMENT FOR SLIP AND PPP SERVICES
1 Add an IP Network Security Group
2 Delete an IP Network Security Group
3 Edit an IP Network Security Group
4 Display all IP Network Security Groups
Enter Menu Selection
[ ? for help, q to quit, RETURN for menu ]
==> q
Top>Config>#
6 . Configure IP addresses (ipas) for those users that require them:
Enter ipas at the Top>Config># prompt or enter config ipas from the
Top directory.
Follow the on-screen instructions for adding a reserved IP address.
Reserved IP addresses are useful in cases in which a user’s security
privileges are dependent on his/her source IP address. In other
computing environments, a reserved IP address could be used to
assure that a well known permanent IP address is set aside for
server applications residing on a user’s client machine.
5-4 Issue 3