- Hewlett-Packard User Guide Printer LCS60
Table Of Contents
- TR.PDF
- 1.PDF
- 2.PDF
- Hardware Installation
- Introduction
- Site Preparation
- Assembly
- Installing the LCS60
- Rack Mounting
- Wall Mounting
- Table-Top Mounting
- Connecting the System Console
- Direct Connection to the LCS60
- Connection through a Data Switch
- Connection through Modems
- Connection through StarKeeper II NMS
- Connecting the Fiber Interface
- Configuration of the Lucent Technologies Data Switch ± LCS60
- Power and Grounding
- Verify LCS60 Console Connection
- Verify Fiber Connection
- Configure the LCS60
- LAN Connections
- Hardware Installation
- 3.PDF
- 4.PDF
- 5.PDF
- 6.PDF
- 7.PDF
- 8.PDF
- Administration
- Basics
- Logging On
- lcsadm Interface
- Typical Administrative Tasks
- Backup and Restore Operations
- Network Access Password Option
- Status
- Error Messages
- Administration
- 9.PDF
- 10.PDF
- 11.PDF
- 12.PDF
- 13.PDF
- 14.PDF
- 15.PDF
- 16.PDF
- IX.PDF

PPP
Administration
Log File
The log file, ppp.log, is written to by the LCS60 PPP server and contains informa-
tion about incoming PPP call requests. To display the contents of the log file, use
the page command as shown in the example below:
# pg /usr/adm/lcs/ppp.log
Fri Feb 16 11:32:55 13714 [3] ppp1 NEW 1.1 dkserver=morse dk=mlkway/earth/ \
inbound.54.6 ch=508 uid=tbaker rqst_reserved=1
Fri Feb 16 11:34:22 13714 [3] ppp1 DEL 1.1
Tue Feb 20 13:34:25 13714 [3] ppp1 NEW 1.1 dkserver=morse dk=mlkway/earth/ \
yardnac.65.3 ch=510 uid=pdavison rqst_reserved=1
Tue Feb 20 13:40:01 13714 [3] ppp1 DEL 1.1
Tue Feb 20 13:54:49 13714 [3] ppp1 NEW 1.1 dkserver=morse dk=mlkway/earth/ \
yardnac.65.3 ch=510 uid=pdavison rqst_reserved=1
Tue Feb 20 15:42:47 13714 [3] ppp1 NEW 1.3 dkserver=morse dk=mlkway/earth/ \
yardnac.65.3 ch=508 uid=troughtn rqst_reserved=1
Tue Feb 20 15:51:52 13714 [3] ppp1 DEL 1.3
Tue Feb 20 15:52:45 13714 [3] ppp1 NEW 1.4 dkserver=morse dk=mlkway/earth/ \
yardnac.65.3 ch=508 uid=troughtn rqst_reserved=1
Tue Feb 20 15:54:12 13714 [3] ppp1 DEL 1.4
Wed Feb 21 08:33:52 13714 [3] ppp1 DEL 1.1
Wed Feb 21 08:33:53 13714 [3] ppp1 exited
Wed Feb 21 10:32:25 489 [3] ppp1 started loglevel = 3
Wed Feb 21 10:32:25 489 [3] ppp1 nfiles=256
Wed Feb 21 11:04:15 388 [3] ppp1 p3m received HANGUP for protocol: 802b
•
•
Related Commands
The following commands may be of particular interest when administering the
LCS60’s PPP service:
• ping • ipxping • atping
• netstat • ipxnetstat • atnetstat
The manual pages for these commands are contained in Appendix E of this docu-
ment; they are also available online.
Issue 3 4-21










