Getting Started HP Notebook
© Copyright 2010 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Welcome Finding information ............................................................................................................................... 2 2 Getting to know your computer Top ...................................................................................................................................................... 5 TouchPad ............................................................................................................................ 5 Lights .
Pinching/Zooming ............................................................................. 24 Rotating ............................................................................................ 24 5 Maintenance Inserting or removing the battery ........................................................................................................ 25 Replacing or upgrading the hard drive ...............................................................................................
1 Welcome ● Finding information After you set up and register the computer, it is important to take the following steps: ● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet. For more information, refer to Networking on page 15. ● Update your antivirus software—Protect your computer from damage caused by viruses. The software is preinstalled on the computer and includes a limited subscription for free updates.
Finding information The computer comes with several resources to help you perform various tasks. Resources For information about Quick Setup poster ● How to set up the computer ● How to identify computer components HP Notebook Reference Guide ● Power management features To access this guide, select Start > Help and Support > User Guides.
Resources For information about Limited Warranty* Warranty information To access the warranty: Select Start > Help and Support > HP Warranty. – or – Go to http://www.hp.com/go/orderdocuments. *You may find the HP Limited Warranty applicable to your product located in the Start menu on your computer and/or on the CD/DVD provided in the box. Some countries/regions may provide a printed HP Limited Warranty in the box.
2 4 Getting to know your computer ● Top ● Right side ● Left side ● Display ● Wireless antennas ● Bottom ● Additional hardware Chapter 2 Getting to know your computer
Top TouchPad Component Description (1) To turn the TouchPad on and off, quickly double-tap the TouchPad light. TouchPad light ● Off: TouchPad is on. ● Amber: TouchPad is off. (2) TouchPad zone* Moves the pointer and selects or activates items on the screen. (3) Left TouchPad button* Press the left side of the TouchPad button to execute functions performed by the left button on an external mouse.
Component Description (1) ● Off: TouchPad is on. ● Amber: TouchPad is off. (2) Caps lock light On: Caps lock is on. (3) Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on. ● Amber: All wireless devices are off.
Button and speakers NOTE: Your computer may look slightly different from the illustration in this section. Component Description (1) Speaker grill Two integrated speakers produce sound. (2) Power button* ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.
Keys NOTE: Your computer may look slightly different from the illustration in this section. Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) Send e-mail key Opens a new e-mail in your default e-mail client. (3) Media application key Launches CyberLink PowerDVD. (4) Web browser key Launches your default web browser. (5) Print key Sends the currently-active document to the default printer.
Right side NOTE: Your computer may look slightly different from the illustration in this section. Component Description (1) Optical drive (select models only) Reads and writes to an optical disc. (2) Optical drive light (select models only) Blinking: The optical drive is being accessed. (3) USB port Connects an optional USB device. (4) AC adapter light ● Blinking white: The computer is in Sleep mode. ● White: The computer is connected to external power. ● Amber: The computer is charging.
Left side NOTE: Your computer may look slightly different from the illustration in this section. Component Description (1) External monitor port Connects an external VGA monitor or projector. (2) Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (3) RJ-45 (network) jack Connects a network cable.
Display Component Description (1) Internal microphone (select models only) Records sound. (2) Webcam (select models only) Records video and captures still photographs. (3) Webcam light (select models only) On: The webcam is in use.
Wireless antennas Your computer model has two antennas that send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer. NOTE: For optimal transmission, keep the areas immediately around the antennas (shown in the previous illustration) free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region.
Bottom Component Description (1) Battery bay Holds the battery. (2) Vents (4) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (3) Battery release latch Releases the battery from the battery bay. (4) Memory module compartment Contains the two memory module slots. (5) Hard drive bay Holds the hard drive.
Additional hardware Component Description (1) Power cord* Connects an AC adapter to an AC outlet. (2) AC adapter Converts AC power to DC power. (3) Battery* Powers the computer when the computer is not plugged into external power. *Batteries and power cords vary in appearance by region and country.
3 Networking ● Using an Internet service provider (ISP) ● Connecting to a wireless network NOTE: Internet hardware and software features vary depending on computer model and your location. Your computer may support one or both of the following types of Internet access: ● Wireless—For mobile Internet access, you can use a wireless connection. Refer to Connecting to an existing WLAN on page 16 or Setting up a new WLAN network on page 17.
Using an Internet service provider (ISP) Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless computer to the modem, and test the Internet service. NOTE: Your ISP will give you a user ID and password to access the Internet. Record this information and store it in a safe place.
5. Click Connect. 6. If required, enter the security key. Setting up a new WLAN network Required equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ● A wireless router (purchased separately) (2) ● Your new wireless computer (3) NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type of modem you have.
Configuring a wireless router For help in setting up a WLAN, refer to the information provided by your router manufacturer or your ISP. The Windows operating system also provides tools to help you set up a new wireless network. To use the Windows tools to set up your network, select Start > Control Panel > Network and Internet > Network and Sharing Center > Set up a new connection or network > Set up a new network. Then follow the on-screen instructions.
4 Keyboard and pointing devices ● Using the keyboard ● Using pointing devices Using the keyboard The icons on the f1 through f12 keys represent the action key functions. NOTE: Depending on the program you are using, pressing fn and one of the action keys opens a specific shortcut menu within that program. The action key feature is enabled at the factory. If you disable this feature in the Setup Utility, you will need to press fn and an action key to activate the assigned function.
Function Action key or hotkey Press and hold f2 to decrease the screen brightness level incrementally. Press and hold f3 to increase the screen brightness level incrementally. Press f4 to switch the screen image among display devices connected to the computer. For example, if a monitor is connected to the computer, pressing this key alternates the screen image from the computer display to the monitor display to simultaneous display on both the computer and the monitor.
Using pointing devices NOTE: In addition to the pointing devices included with your computer, you can use an external USB mouse (purchased separately) by connecting it to one of the USB ports on the computer. Setting pointing device preferences Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Devices and Printers.
Navigating To move the pointer, slide one finger across the TouchPad in the direction you want the pointer to go. Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse.
Using TouchPad gestures The TouchPad supports a variety of TouchPad gestures, which are disabled by default. To activate the TouchPad gestures, place two fingers on the TouchPad as described in the following sections. To enable or disable TouchPad gestures: 1. Double-click the Synaptics icon in the notification area at the far right of the taskbar. 2. Select or clear the Disable gestures check box. 3.
Pinching/Zooming Pinching allows you to zoom in or out on images or text. ● Zoom in by placing two fingers together on the TouchPad, and then moving them apart. ● Zoom out by placing two fingers apart on the TouchPad, and then moving them together. Rotating Rotating allows you to rotate items such as photos. To rotate, anchor your left forefinger in the TouchPad zone. Move the right forefinger around the anchored finger in a sweeping motion, moving from 12 o’clock to 3 o’clock.
5 Maintenance ● Inserting or removing the battery ● Replacing or upgrading the hard drive ● Adding or replacing memory modules ● Updating programs and drivers ● Routine care Inserting or removing the battery NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide. To insert the battery: ▲ Insert the battery (1) into the battery bay (2) until it is seated. The battery release latch (3) automatically locks the battery into place.
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery. 26 1. Turn the computer upside down on a flat surface, with the battery bay toward you. 2. Slide the battery release latch (1) to release the battery 3. Pivot the battery (2) upward and remove it (3) from the computer.
Replacing or upgrading the hard drive CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. Removing the hard drive To remove the hard drive: 1.
11. Remove the hard drive (4) from the hard drive bay. Installing the hard drive To install the hard drive: 28 1. Grasp the tabs (1) on the hard drive and lower the hard drive (2) into the hard drive bay, then press down on the hard drive to be sure that the drive is firmly seated. 2. Connect the hard drive cable (3) to the system board, and then replace the three screws (4) that secure the hard drive to the computer. 3. Align the tabs (1) on the hard drive cover with the notches on the computer.
5. Tighten the hard drive cover screws (3). 6. Replace the battery. 7. Turn the computer right-side up. 8. Reconnect external power and external devices. 9. Turn on the computer.
Adding or replacing memory modules The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module.
9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. c.
c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notch on the computer. 12. Close the cover (2). 13. Tighten the memory module compartment screws (3). 14. Replace the battery. 15. Turn the computer right-side up. 16. Reconnect external power and external devices. 17. Turn on the computer.
Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis with the latest versions. Go to http://www.hp.com/support to download the latest versions. You can also register to receive automatic update notifications when they become available. Routine care Cleaning the display CAUTION: To prevent permanent damage to the computer, never spray water, cleaning fluids, or chemicals on the display.
6 Backup and recovery ● Recovery discs ● Performing a system recovery ● Backing up your information Recovery after a system failure is as good as your most recent backup. HP recommends that you create recovery discs immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup.
Guidelines: ● Purchase high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or CD-R discs. DVDs and BDs have a much higher storage capacity than CDs. If you use CDs, up to 20 discs may be required, whereas only a few DVDs or BDs are required. NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs, are not compatible with Recovery Manager software. ● The computer must be connected to AC power during this process.
To restore the computer from the partition, follow these steps: 1. Access Recovery Manager in either of the following ways: ● Select Start > All Programs > Recovery Manager > Recovery Manager. – or – ● Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen. Then, press f11 while the “F11 (HP Recovery)” message is displayed on the screen. 2. Click System Recovery in the Recovery Manager window. 3.
Guidelines: ● Be sure that the computer is connected to AC power before you start the backup process. ● Allow enough time to complete the backup process. Depending on file sizes, it may take over an hour. To create a backup: 1. Select Start > Control Panel > System and Security > Backup and Restore. 2. Follow the on-screen instructions to schedule and create a backup. NOTE: Windows includes the User Account Control feature to improve the security of the computer.
7 Customer support ● Contacting customer support ● Labels Contacting customer support If the information provided in this user guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/ go/contactHP. NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Here you can: ● Chat online with an HP technician.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer: ● Serial number label—Provides important information, including the following: Component (1) Product name (2) Serial number (s/n) (3) Part number/Product number (p/n) (4) Warranty period (5) Model description Have this information available when you contact technical support. The serial number label is affixed inside the battery bay.
8 Specifications ● Input power ● Operating environment Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz.
Operating -15 m to 3,048 m -50 ft to 10,000 ft Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft Operating environment 41
Index A AC adapter light, identifying 9 AC adapter, identifying 14 action keys identifying 8 antennas 12 applications key, Windows 8 audio-in (microphone) jack, identifying 10 audio-out (headphone) jack, identifying 10 B backing up customized window, toolbar, and menu bar settings 36 personal files 36 battery bay 39 battery bay, identifying 13 battery release latch, identifying 13 battery, identifying 14 battery, replacing 25 bays battery 13 hard drive 13 Bluetooth label 39 buttons power 7 TouchPad 5 C cap
microphone jack, identifying 10 monitor port, external 10 mouse, external setting preferences 21 O operating environment 40 optical drive identifying 9 light 9 P pinching TouchPad gesture 24 pointing devices, setting preferences 21 ports external monitor 10 USB 9, 10 VGA 10 power button, identifying 7 power connector, identifying 9 power cord, identifying 14 power light, identifying 6 product name and number, computer 39 R recovering a program or driver 34 recovering from the dedicated recovery partition 35
