Compaq Presario CQ56 Notebook PC and HP G56 Notebook PC - Maintenance and Service Guide

Remove the keyboard:
1. Position the computer upside down, with the front toward you.
2. Remove the three Phillips 2.5×5.0 and three Phillips 2.5×6.0 screws that secure the keyboard to
the computer.
3. Position the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Release the tabs along the left (1) and right (2) edges of the keyboard using a thin, flat-bladed
screwdriver.
6. Lift the rear edge of the keyboard (3).
Component replacement procedures 47