Specifications

ChemStation Plus Method Validation Pack — User Management and Access Rights
The user levels are part of
ChemStation Plus user administra-
tion as shown in figure 37. They
are configured in the ChemStore
database. All users have two iden-
tification pieces, user ID and pass-
word. One user ID is valid for all
ChemStation Plus modules, so
users only have to remember one
password for all ChemStation Plus
components.
52
Based on the hierarchical struc-
ture of the Method Validation
Pack software, the system has five
user levels. They are:
1) Reporting: Logging into the
system with a name and a pass
word of level 1 (reporting) gives
you access to report output
only. At this level, data changes
are impossible.
2) Data input: Logging into the
system with a name and a pass
word of level 2 (data input)
gives you access to all level 1
tasks and validation data input
and graphics/report output.
3) Planning: Logging into the
system with a name and a pass
word of level 3 (planning) gives
you access to all level 1 and
level 2 tasks plus checkpoint
planning.
4) Configuration: level 4 (configu-
ration) gives you access to con
figuration rights and all level 1-3
tasks. You may change the con-
figuration values of each
validation.
5) Administration: Logging into
the system with a name and a
password of administrator level
5 gives you access to all func-
tions of Method Validation Pack
including program configura-
tion (global settings).
Figure 37
Central user administration for ChemStation Plus including Method Validation
Pack user administration and user levels