Getting Started Guide

HP Smart Install
Windows USB 安装
注：某些病毒检测和防火墙软件可能会阻止您安装产品软件。
用 USB 电缆连接计算机和产品。HP Smart Install 程序（参见上图）
应在 30 秒内自动启动。
注： 如果 HP Smart Install 程序未自动启动，则可能在计算机上禁用
了自动播放。 浏览“我的电脑”，然后双击 HP Smart Install CD
驱动器。双击 SISetup.exe 文件运行程序，以便安装产品。如果
找不到 HP Smart Install CD 驱动器，请拔下 USB 电缆，然后使
用软件 CD 安装产品。
按照屏幕说明进行操作。
如果提示选择连接类型，请选择 Congure to print using USB
（使用 USB 配置打印）选项。
1.
2.
3.
CN
EN
Windows USB installation
Note: Some virus-checking and rewall software might prevent you from installing the
product software.
Connect the USB cable between the computer and the product. The HP Smart Install
program (see picture above) should start automatically within 30 seconds.
Note:
If HP Smart Install does not start automatically, AutoPlay might be disabled on
your computer. Browse My Computer and double-click the HP Smart Install CD
drive. Double-click the SISetup.exe le to run the program to install the product.
If you cannot nd the HP Smart Install CD drive, disconnect the USB cable and
use the software CD to install the product.
Follow the onscreen instructions.
If prompted to select a connection type, select the Congure to print using USB option.
1.
2.
3.
7
8