Reference Guide

Size
The Width: and Length: values can be changed by typing numeric strings into the edit boxes.
Any entry that is too large is rounded down to the maximum valid entry, while any entry that is too small
is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the last valid entry. Width and length entries are validated
when the focus changes.
The resolution of each control is 1/100 of a millimeter or 1/100 of an inch, depending on the current
measurement units.
Units
To change measurement units, click the button which displays either Use Inches or Use Millimeters.
Custom width and height control limits
The minimum paper size for this product is 98.4 x 148.0 mm (3.87 x 5.83 in) and the maximum is 215.9
x 355.6 mm (8.5 x 14.0 inches). The following table summarizes paper size limits for each paper-
handling device.
Table 4-1 Host based driver custom paper sizes
Tray Dimensions Minimum Maximum
Tray 1 (150-sheet
multipurpose)
Width 98.4 mm (3.87 inches) 215.9 mm (8.5 inches)
Height 148.0 mm (5.83 inches) 355.6 mm (14.0 inches)
Use the short media extender tool
This product is equipped with a short media extender tool for loading short media into the product. A
help video plays automatically when a selection is made from the Size is: drop-down list that qualifies
as short media. The help video illustrates how to use the short media extender tool.
Use Different Paper/Covers
Select User Different Paper/Covers to assign different paper types for the pages in your printed
document.
ENWW Paper/Quality tab features 127