Reference Guide

feeder or flatbed scanning, but does not support duplex scanning. The WIA scan driver supports the

following file types:

●

.BMP

●

.JPG

●

.GIF

●

.TIFF

●

.FPX

●

.PNG

NOTE: For more information about scanning, see the HP LaserJet CM1410 MFP Series User Guide,

which is available on the printing-system CD that came with the product.

HP LaserJet Fax Setup Utility

The HP LaserJet Fax Setup Utility runs automatically after the printing-system software is installed.

HP recommends that you run the utility to configure the fax settings for both the software and the

product control panel. Run the utility even if you have already configured the fax settings. The settings

in the HP LaserJet Fax Setup Utility are used by HP ToolboxFX to run other faxing features, such

as the fax cover page.

NOTE: You can also start the HP LaserJet Fax Setup Utility by clicking Start, selecting

Programs or All Programs, selecting HP, selecting the name of the product, and then clicking HP

Fax Setup Wizard.

NOTE: For more information about faxing, see the HP LaserJet CM1410 MFP Series User Guide,

which is available on the printing-system CD that came with the product.

ENWW

HP LaserJet Fax Setup Utility