Reference Guide

Service mode functions
Secondary service menu
Use the secondary service menu to print service-related reports and to run special tests. Customers do
not have access to this menu.
Open the secondary service menu
1. Touch the Setup button.
2. Touch the middle of the screen along the left-hand edge (callout 1), and then immediately touch
the lower-right corner (callout 2) of the screen.
1
2
3. When the Home screen appears, touch the Setup button.
4. Touch the 2ndary Service button to open the menu.
TIP: When you are finished with the 2ndary Service menu, touch the lower-right corner of the
screen until the Job Settings Cleared message appears on the Home screen. This step removes
the 2ndary Service option from the Setup Menu.
Secondary service menu structure
Table 6-3 Secondary service menu
Menu item Sub-menu item Description
Service Reports Cont. Self-Test This item prints a continuous configuration
page.
Error report This item prints an error report that contains
the last 5 instances of 49 Error, Turn off
then on or 79 Error Turn off then on
errors.
Location A list of available locations appears This item sets certain product parameters that
are dependent on the location, such as the
default paper size and the symbol set.
Scroll to the appropriate location and select
Yes to set the location. The product
automatically restarts after you change the
location.
202 Chapter 6 Solve problems ENWW