Reference Guide

LED test failure. This error will only appear on the Error report. The LED did not illuminate during
initialization.
◦
Replace the document-feeder scanner assembly.
●
Scanner error 17, Turn off then on
Scanner error. This error appears on the control panel. The scanner motor is obstructed.
Scanner reserved for PC scan
Description
A computer is using the product to create a scan.
Recommended action
Wait until the computer scan has finished, or cancel the scan from the computer software, or touch the
Cancel
button.
Scanning error Cannot connect
Description
The product cannot transmit scan information to a computer.
Recommended action
Verify that the connection cable is not loose or damaged. Replace the cable if necessary, and try the
scan again.
Settings cleared
Description
The product has cleared job settings.
Recommended action
Re-enter any appropriate job settings.
Used [color] installed, to accept press OK
Description
A used color printer cartridge has been installed or moved.
Recommended action
Touch the OK button to return to the Ready state.
Yellow Cartridge Low
Description
The print cartridge is nearing the end of its useful life.
166 Chapter 6 Solve problems ENWW