Reference Guide

Menu item Sub-menu item Sub-menu item Description
Detect Dial Tone On
Off*
Sets whether the product should check for a dial tone
before sending a fax.
Billing Codes On
Off*
Enables the use of billing codes when set to On. A prompt
appears where you can enter the billing code for an
outgoing fax.
Extension Phone On*
Off
When this feature is enabled, you can press the 1-2-3
buttons on the extension phone to cause the product to
answer an incoming fax call.
Stamp Faxes On
Off*
Sets the product to print the date, time, sender's phone
number, and page number on each page of incoming
faxes.
Private Receive On
Off*
Setting Private Receive to On requires you to set a
product password. After setting the password, the following
options are set:
●
Private Receive is turned on.
●
All old faxes are deleted from memory.
●
Fax forwarding is set to Off and is not allowed to be
changed.
●
All incoming faxes are stored in memory.
Confirm Fax
Number
On
Off*
Confirm a fax number by entering it a second time.
Allow Fax Reprint On*
Off
Sets whether incoming faxes are stored in memory for
reprinting later.
Fax/Tel Ring Time 20
30
40
70
Sets the time, in seconds, after which the product should
stop sounding the Fax/Tel audible ring to notify the user of
an incoming voice call.
Fax Speed Fast(V.34)*
Medium(V.17)
Slow(V.29)
Sets the allowed fax communication speed.
138 Chapter 6 Solve problems ENWW