Reference Guide

Fax Setup menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Description
Fax Set-Up Utility This is a tool for configuring the fax settings. Follow the on-
screen prompts and select the appropriate response for
each question.
Basic Setup Time/Date (Settings for time
format, current
time, date format,
and current date.)
Sets the time and date setting for the product.
Fax Header Enter your fax
number.
Enter company
name.
Sets the identifying information that is sent to the receiving
product.
Identifies the fax sender (optional)
Answer Mode Automatic*
Manual
TAM
Fax/Tel
Sets the type of answer mode. The following options are
available:
●
Automatic: The product automatically answers an
incoming call on the configured number of rings.
●
Manual: The user must press the Start Fax button or
use an extension phone to make the product answer
the incoming call.
●
TAM: A telephone answering machine (TAM) is
attached to the Auxilary phone port of the product.
The product will not pick up any incoming call, but
only listen for fax tones after the answering machine
has picked up the call.
●
Fax/Tel: The product must automatically pick up the
call and determine if the call is a voice or fax call. If
the call is a fax call, the product handles the call as
usual. If the call is a voice call, an audible synthesized
ring is generated to alert the user of an incoming voice
call.
Rings to Answer Sets the number of rings that must occur before the fax
modem answers. The default setting is 5.
136 Chapter 6 Solve problems ENWW