Reference Guide

The HP LaserJet Pro CM1410 Color MFP Series product has printing options that you can install and
configure in this section. The following controls are available:
●
Automatic Configuration
●
Allow Manual Duplexing
●
Job Separator
Automatic Configuration
Use the Device Settings tab to tell the driver about the hardware configuration of the product. If
bidirectional communication is enabled in a supported environment, update this tab by selecting the
Update Now setting in the Automatic Configuration setting. The default setting is Off. After an
automatic configuration, the setting returns to Off after the changes are made.
If your environment does not support bidirectional communication, the Update Now setting is
unavailable, so you must manually configure the options on this tab.
If you have more than one driver installed for the product (for example, the default HP PCL 6 Print
Driver and the HP PCL 5 Universal Print Driver), the Update Now feature works automatically only on
the driver on which it is activated. The other driver will not be updated, and might show the default
setting for the specific product model.
Allow Manual Duplexing
Select Allow Manual Duplexing to print on both sides of any supported size and most types of
paper (except transparencies, envelopes, and labels). To use this feature, you must reinsert the paper
stack into the input tray to print the second side. The product pauses while you make this adjustment.
This setting is enabled by default.
Job Separator
Use this control to specify whether a print job identifier page should be printed between print jobs.
ENWW
Device Settings tab features
101