Manualshelf

Reference Guide

ManualsBrandsHP ManualsAll in One PrinterHP LaserJet Pro CM1415fn Color Multifunction Printer
111112113114115116117118119120
The HP LaserJet Pro CM1410 Color MFP Series product supports more than one source of paper. You
can assign a form (which defines the paper size and margins) to each paper source. When a form is
matched to a source, you can select the form when you print. The product prints from the tray to which
that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the
paper size that is loaded into each available input tray. The use of forms constrains the choices that are
available in the paper-size list on the Paper/Quality tab in the Printing Preferences driver tabs.
This constraint prevents (or reduces the likelihood of) tying up the product with paper-mount messages
that occur when users request sizes or types that are not available.
The trays listed in the Form to Tray Assignment setting include standard trays and optional
accessory trays. Generally, items that are installed separately have a separate Installable Options
setting.
The input trays listed here are also listed as paper sources on the Paper/Quality tab.
Configuring the trays
1. Select the appropriate tray in the Form to Tray Assignment list.
2. Use the drop-down menu to select the paper size (or form) that is loaded in that tray.
3. Repeat steps 1 and 2 for the remaining trays.
4. Click OK to enable your settings, or, if necessary, click Cancel to reconfigure all the trays, and
remove the size and type constraints that have been imposed on the Paper/Quality tab.
Font Substitution Table
Use the Font Substitution Table settings to change the TrueType to printer font mapping and to
install and remove external fonts for the product through the External Fonts option. External fonts can
be soft fonts or DIMM fonts.
Click the Font Substitution Table option to open a list of fonts, as show in the following figure. Use
the settings to change the TrueType-to-product font mappings.
External Fonts
Use the External Fonts option to install and remove external fonts for the product. External fonts can
be soft fonts or DIMM fonts.
Click the External Fonts option to make the Properties button available. Click Properties to open
the HP Font Installer dialog box, which is shown in the following figure.
ENWW
Device Settings tab features
99