Reference Guide

Print Quality
The Print Quality group box contains the Print Quality drop-down box and the EconoMode check
box.
The default setting for Print Quality is FastRes 1200.
This setting controls resolution, which refers to the number of dots per inch (dpi) used to print the page.
As resolution is increased, the quality (clarity and visual appeal) of print on the page is improved.
However, higher resolution might also result in longer printing times. The following Print Quality options
are available in the drop-down box:
●
FastRes 1200
●
600 dpi
Select the EconoMode check box in conjunction with any of the print quality settings. When using
EconoMode, the device uses less toner on each page. Using this option might extend the life of the print
cartridge and can lower the cost per page, but also reduces print quality. Using the EconoMode feature
with non-HP print cartridges can result in toner spillage or device damage.
Effects tab features
Use the Effects tab to create unique paper effects such as scaling and watermarks. The following
illustration shows the Effects tab.
Figure 4-9 Effects tab
The Effects tab contains the following controls:
ENWW Driver tabs 97
Host-based driver
features for MS Windows