Reference Guide

The Source is: drop-down menu can contain the following options:
●
Auto Select
●
Manual Feed
●
Tray 1
The default setting is Auto Select. When this is selected, the device uses the source tray that supports
the selected paper size. If you select a source tray other than Auto Select, make sure that the correct
paper size is loaded in the source tray.
For more information about paper sources, see
Media attributes on page 128.
Type is:
The Type is: drop-down menu shows all the paper types that the HP LaserJet M1120 MFP Series
supports. When you use the default setting, Letter, the device uses the default paper type, which is
usually Plain.
The following standard paper types appear in the lists.
Table 4-1 Standard paper types and engine speed
Paper type Engine speed
Plain Full – 1:1
HP Multipurpose Paper Full – 1:1
HP Office Paper Full – 1:1
HP All-in-One Printing Paper Full – 1:1
HP LaserJet Paper Full – 1:1
HP Premium Choice LaserJet Paper Full – 1:1
Preprinted Full – 1:1
Letterhead Full – 1:1
Transparency Half – 1:2
Prepunched Full – 1:1
Labels Half – 1:2
Bond Half – 1:2
1
Recycled Full – 1:1
Color Full – 1:1
Light (< 75 g/m
2
)
Full – 1:1
Heavy (90 to 105 g/m
2
)
Half – 1:2
1
Cardstock (105 to 176 g/m
2
)
Half – 1:2
1
Envelope Half – 1:2
1
Rough Half – 1:2
1
1
Throughput for continuous printing might be less than 4 pages per minute as a result of fuser heating limitations.
ENWW Driver tabs 93
Host-based driver
features for MS Windows