Reference Guide

Paper Options
The settings specified in the Paper Options group box on the Paper/Quality tab apply to all of the
pages of the document. The following illustration shows the Paper Options group box and the selections
available.
Figure 4-5 Paper Options group box
The following are settings in the Paper Options group box:
●
Size is:
●
Source is:
●
Type is:
Size is:
The Size is: setting is a drop-down menu that lists all of the supported paper sizes.
Specify the size for all the settings in the Paper Options group box. You must use the same size of
paper for the entire print job. That is, if the print job uses letter-size paper, any option that you select
from the available Use Different Paper/Covers options must also use letter-size paper.
NOTE: Certain software programs can override the size command and specify different paper sizes
within a single document.
For the Other Pages and Back Cover settings, select a source (tray) and paper type that differ from
the settings selected for First Page. If a conflict exists among paper source, paper size, and/or paper
type, and you choose to keep the conflicting settings, the settings are processed in the following order:
paper size, paper type, and then paper source.
Because driver settings are overridden by paper-size settings in most software programs, use the driver
to set paper size only for software programs that don't have a paper-size setting, such as NotePad, or
when producing a book or a booklet that does not require different paper sizes.
NOTE: When using a software program that has a paper-size setting, specify different paper sizes
within a single document by using the Use Different Paper/Covers options.
For more information about paper sizes, see Media attributes on page 128.
ENWW Driver tabs 91
Host-based driver
features for MS Windows