User Guide

Device side covers
NOTE Some photos show a device other than the HP LaserJet M1005 MFP. Repair and
replacement procedures in this chapter are for the HP LaserJet M1005 MFP and are not affected
by cosmetic differences (for example, the color of the covers) shown in these photos.
NOTE The procedure for removing the right-side and left-side covers is identical, with the
exception of the location of the screw that fastens the cover to the device. The right-side cover
is shown in the following procedure.
1. Remove one screw (callout 1; the right-side cover uses a black screw). Callout 2 is on the left-side
cover.
Figure 6-34 Remove the device side covers (1 of 3)
82 Chapter 6 Removal and replacement ENWW