User Guide

Media input tray
NOTE Some photos show a device other than the HP LaserJet M1005 MFP. Repair and
replacement procedures in this chapter are for the HP LaserJet M1005 MFP and are not affected
by cosmetic differences (for example, the color of the covers) shown in these photos.
1. Open the media input tray lid.
Figure 6-28 Remove the media input tray (1 of 3)
2. Slide the adjustable media guides (callout 1) to the center of the tray.
Figure 6-29 Remove the media input tray (2 of 3)
78 Chapter 6 Removal and replacement ENWW