User Guide

Device pickup roller
1. Remove the print cartridge and locate the device pickup roller. See Print cartridge on page 74.
Figure 6-23 Remove the device pickup roller (1 of 5)
2. Gently release the small, white tabs on each side of the pickup roller by pushing them away from
the roller, and then rotate the roller away from the mounting frame.
CAUTION Do not touch the black-sponge transfer roller inside the device. Touching the
transfer roller can damage the device.
Use gentle pressure to release the small white tabs to avoid breaking them.
Figure 6-24 Remove the device pickup roller (2 of 5)
ENWW Removal and replacement strategy 75