User Guide

Service-mode functions
Use the following information to perform system-wide reset procedures and to adjust certain global
settings such as the country/region.
Secondary service menu
Use the secondary service menu to perform various tests and print service reports. The following is a
hierarchical diagram of the secondary service menu.
Main menu Submenu Submenu
2ndary Service Service Reports Cont. Self-Test
Cont Copy
Error Report
Cal graphics
NOTE Prints graphics used for
calibrating the scanner.
High speed USB Off
On
Show firmware version
NOTE Displays the date code
of the installed firmware.
Button test
NOTE Use this item to test the
control-panel buttons.
Display test
NOTE Use this item to test the
control-panel display.
To gain access to the secondary service menu
1. Make sure that the control-panel display reads Ready.
2. Press Menu/Enter.
3. Press < and OK buttons simultaneously.
4. When the message Main Menu 2ndary Service appears on the display, press OK.
5. Use the < or > button to navigate the secondary service menu.
6. To exit the secondary service menu, press Cancel to return to the Ready display, and then
press cancel again.
ENWW Service-mode functions 141