User Guide

Parts of the page around the edges are not printing.
Cause Solution
The device cannot print to the edge of the paper. The device
has minimum margins on each edge of 6 mm (0.25 inch).
To fit the image into this printable area, slightly reduce the size
of the image.
If copying, the reduction setting is incorrect. Copied images will be clipped if the image on the original is too
close to the edge of the original.
The paper size setting is incorrect. Set the correct page size on the control-panel menu.
Vertical white stripes appear.
Cause Solution
The media does not meet HP specifications (for example, it is
too moist or too rough).
Make sure that the media meets specifications detailed in
the HP LaserJet Printer Family Print Media Guide.
The toner is low. Gently shake the print cartridge back and forth to redistribute
the toner.
ENWW Solving scanning (copying) image-quality problems 125