User Guide

Installing the scanner cushions
NOTE Some photos show a device other than the HP LaserJet M1005 MFP. Repair and
replacement procedures in this chapter are for the HP LaserJet M1005 MFP and are not affected
by cosmetic differences (for example, the color of the covers) shown in these photos.
1. Open the print-cartridge door.
2. Place a scanner cushion in the wells on the scanner support frame (callout 1). Use the eraser end
of a pencil or use an ink pen with the cap on to seat each cushion in its well.
Figure 6-47 Installing the scanner cushions
90 Chapter 6 Removal and replacement ENWW