User Guide

Print-cartridge door
NOTE Some photos show a device other than the HP LaserJet M1005 MFP. Repair and
replacement procedures in this chapter are for the HP LaserJet M1005 MFP and are not affected
by cosmetic differences (for example, the color of the covers) shown in these photos.
1. Remove the scanner assembly. See Scanner assembly on page 67.
2. Fully open the print-cartridge door and gently pull downward on both print-cartridge swing arms
(callout 1) to release them (the left arm is shown disengaged).
CAUTION Be careful when releasing the swing arms. They can easily break.
Figure 6-38 Remove the print-cartridge door (1 of 2)
3. Rotate the door toward the back of the device and then lift it up and off of the device.
Figure 6-39 Remove the print-cartridge door (2 of 2)
ENWW Removal and replacement strategy 85