- HP Printer User Manual

2 Post insertion overview ENWW
Post insertion kit (Q3636A) product specifications
Type
Sheet feeder employing torque-limiter
separation
Functions
Automatic sheet feed (online operation)
The Q3636A automatically feeds sheets
into the finisher in accordance with
instructions from the MFP.
Manual sheet feed (offline operation)
User feeds sheets into finisher by
operating the PI control panel.
User can select from the following four
finishing modes
• Single-staple mode (staple at rear)
• Two-staple mode (flat stapling)
• Punch mode (with punch kit)
• Staple-and-fold mode (available only if
mounted to the Q3634A)
• Tri-fold mode (available only if mounted
to the Q3634A)
• Manual sheet feed is only available with
the lower tray.
This is not allowed for wide papers.
Copy paper
Plain paper
60 to 90 g/m
2
or 17 lb to 24 lb high-quality
paper, recycled paper
Special paper
● 50 to 59 g/m
2
or 13 lb to 16 lb high-quality
paper, recycled paper
● 91 to 200 g/m
2
or 24 lb to 45 lb
high-quality paper, recycled paper
Printing paper
● Double-sided art paper
● Mat coating paper
● High-quality paper
Upper tray copy sizes
● Metric area
A4, A4R, B5, B5R, A5
● Inch area
Letter, Letter R, 5.5 by 8.5
Lower tray copy sizes
● Metric area
A3, B4, A4, A4R, B5, B5R, A5, F4
wide paper (314 mm by 445 mm
maximum)
● Inch area
Ledger, 8.5 by 14, Letter, Letter R,
5.5 by 8.5, wide paper
(314 mm by 445 mm maximum.)
Paper staking capacity
Up to 200 sheets (when using 128 g/m
2
or
28 lb-equivalent paper) to maximum.
height of 30 mm
Paper curling
Maximum 10 mm
Power, weight, dimensions
Power source
24 VDC, 5 VDC (supplied from finisher)
Maximum power
30 VA
Weight
Maximum 10.5 kg
External dimensions
Approximately 511 mm (W) by
620 mm (D) by 220 mm (H)
Amount of curl
5 sheets