- HP Printer User Manual

ENWW Safety warnings 15
Safety
Measures to take in case of an accident
If an accident has occurred, the distributor who has been notified first must immediately take
emergency measures to provide relief to affected persons and to prevent further damage.
If a report of a serious accident has been received from a customer, an on-site evaluation must
be carried out quickly and HP must be notified.
To determine the cause of the accident, conditions and materials must be recorded through
direct on-site checks, in accordance with instructions issued by HP.
Conclusion
Safety of users and customer engineers depends highly on accurate maintenance and
administration. Therefore, safety can be maintained by the appropriate daily service work
conducted by the customer engineer.
When performing service, each MFP on the site must be tested for safety. The customer
engineer must verify the safety of parts and ensure appropriate management of the equipment.
● When using any solvent, ventilate the room well.
Breathing large quantities of organic solvents can
lead to discomfort.
● Toner and developer are not harmful substances,
but care must be taken not to breathe excessive
amounts or let the substances come into contact
with eyes, and so forth. It may be stimulative.
If the substances get in the eye, rinse with plenty of
water immediately. When symptoms are noticeable,
consult a physician.
● Never throw the used toner bottle and toner into fire.
You may be burned due to dust explosion.
WARNING: Handling of service materials